use super::{BackupFile, BackupMemoryInterface};
use num::FromPrimitive;
use serde::{Deserialize, Serialize};
extern crate bytesize;
use std::cell::RefCell;
use std::fs;
use std::path::PathBuf;
#[derive(Debug, Clone, Copy)]
pub enum EepromType {
Eeprom512,
Eeprom8k,
}
#[derive(Debug, Serialize, Deserialize, Copy, Clone)]
enum EepromAddressBits {
Eeprom6bit,
Eeprom14bit,
}
impl EepromType {
fn size(&self) -> usize {
match self {
EepromType::Eeprom512 => 0x0200,
EepromType::Eeprom8k => 0x2000,
}
}
fn bits(&self) -> EepromAddressBits {
match self {
EepromType::Eeprom512 => EepromAddressBits::Eeprom6bit,
EepromType::Eeprom8k => EepromAddressBits::Eeprom14bit,
}
}
}
impl Into<usize> for EepromAddressBits {
fn into(self) -> usize {
match self {
EepromAddressBits::Eeprom6bit => 6,
EepromAddressBits::Eeprom14bit => 14,
}
}
}
#[derive(Serialize, Deserialize, Debug, Primitive, PartialEq, Copy, Clone)]
enum SpiInstruction {
Read = 0b011,
Write = 0b010,
}
impl Default for SpiInstruction {
fn default() -> SpiInstruction {
SpiInstruction::Read /* TODO this is an arbitrary choice */
}
}
#[derive(Serialize, Deserialize, Debug, PartialEq, Copy, Clone)]
enum SpiState {
RxInstruction,
RxAddress(SpiInstruction),
StopBit(SpiInstruction),
TxDummy,
TxData,
RxData,
}
impl Default for SpiState {
fn default() -> SpiState {
SpiState::RxInstruction
}
}
#[derive(Serialize, Deserialize, Clone, Debug)]
pub struct EepromChip {
memory: BackupFile,
addr_bits: EepromAddressBits,
state: SpiState,
rx_count: usize,
rx_buffer: u64,
tx_count: usize,
tx_buffer: u64,
address: usize,
chip_ready: bool, // used to signal that the eeprom program was finished
// In real hardware, it takes some time for the values to be programmed into the eeprom,
// But we do it right away.
}
impl EepromChip {
fn new(eeprom_type: EepromType, mut memory: BackupFile) -> EepromChip {
memory.resize(eeprom_type.size());
EepromChip {
memory: memory,
addr_bits: eeprom_type.bits(),
state: SpiState::RxInstruction,
rx_count: 0,
rx_buffer: 0,
tx_count: 0,
tx_buffer: 0,
address: 0,
chip_ready: false,
}
}
fn set_type(&mut self, eeprom_type: EepromType) {
self.addr_bits = eeprom_type.bits();
self.memory.resize(eeprom_type.size());
}
fn reset_rx_buffer(&mut self) {
self.rx_buffer = 0;
self.rx_count = 0;
}
fn reset_tx_buffer(&mut self) {
self.tx_buffer = 0;
self.tx_count = 0;
}
fn fill_tx_buffer(&mut self) {
let mut tx_buffer = 0u64;
for i in 0..8 {
tx_buffer = tx_buffer << 8;
tx_buffer |= self.memory.read(self.address + i) as u64;
}
self.tx_buffer = tx_buffer;
self.tx_count = 0;
}
fn clock_data_in(&mut self, address: u32, si: u8) {
use SpiInstruction::*;
use SpiState::*;
// Read the si signal into the rx_buffer
trace!("({:?}) addr={:#x} RX bit {}", self.state, address, si);
self.rx_buffer = (self.rx_buffer << 1) | (if si & 1 != 0 { 1 } else { 0 });
self.rx_count += 1;
let mut next_state: Option<SpiState> = None;
match self.state {
RxInstruction => {
// If instruction was recvd, proceed to recv the address
if self.rx_count >= 2 {
let insn = SpiInstruction::from_u64(self.rx_buffer).expect(&format!(
"invalid spi command {:#010b}",
self.rx_buffer as u8
));
next_state = Some(RxAddress(insn));
self.reset_rx_buffer();
}
}
RxAddress(insn) => {
if self.rx_count == self.addr_bits.into() {
self.address = (self.rx_buffer as usize) * 8;
trace!(
"{:?} mode , recvd address = {:#x} (rx_buffer={:#x})",
insn,
self.address,
self.rx_buffer
);
match insn {
Read => {
next_state = Some(StopBit(Read));
}
Write => {
next_state = Some(RxData);
self.chip_ready = false;
self.reset_rx_buffer();
}
}
}
}
StopBit(Read) => {
next_state = Some(TxDummy);
self.reset_rx_buffer();
self.reset_tx_buffer();
}
RxData => {
if self.rx_count == 64 {
let mut data = self.rx_buffer;
debug!("writing {:#x} to memory address {:#x}", data, self.address);
for i in 0..8 {
self.memory
.write(self.address + (7 - i), (data & 0xff) as u8);
data = data >> 8;
}
next_state = Some(StopBit(Write));
self.reset_rx_buffer();
}
}
StopBit(Write) => {
self.chip_ready = true;
self.state = RxInstruction;
self.reset_rx_buffer();
self.reset_tx_buffer();
}
_ => {}
}
if let Some(next_state) = next_state {
self.state = next_state;
}
}
fn clock_data_out(&mut self, address: u32) -> u8 {
use SpiState::*;
let mut next_state = None;
let result = match self.state {
TxDummy => {
self.tx_count += 1;
if self.tx_count == 4 {
next_state = Some(TxData);
self.fill_tx_buffer();
trace!("transmitting data bits, tx_buffer = {:#x}", self.tx_buffer);
}
0
}
TxData => {
let result = ((self.tx_buffer >> 63) & 1) as u8;
self.tx_buffer = self.tx_buffer.wrapping_shl(1);
self.tx_count += 1;
if self.tx_count == 64 {
self.reset_tx_buffer();
self.reset_rx_buffer();
next_state = Some(RxInstruction);
}
result
}
_ => {
if self.chip_ready {
1
} else {
0
}
}
};
trace!("({:?}) addr={:#x} TX bit {}", self.state, address, result);
if let Some(next_state) = next_state {
self.state = next_state;
}
result
}
pub(in crate) fn is_transmitting(&self) -> bool {
use SpiState::*;
match self.state {
TxData | TxDummy => true,
_ => false,
}
}
pub(in crate) fn reset(&mut self) {
self.state = SpiState::RxInstruction;
self.reset_rx_buffer();
self.reset_tx_buffer();
}
}
// #[derive(Serialize, Deserialize, Debug, PartialEq, Copy, Clone, Default)]
// struct ChipSizeDetectionState {
// insn: SpiInstruction,
// rx_buffer: u64,
// rx_count: usize,
// }
/// The Eeprom controller is usually mapped to the top 256 bytes of the cartridge memory
/// Eeprom controller can programmed with DMA accesses in 16bit mode
#[derive(Serialize, Deserialize, Clone, Debug)]
pub struct EepromController {
pub(in crate) chip: RefCell<EepromChip>,
detect: bool,
}
impl EepromController {
pub fn new(path: Option<PathBuf>) -> EepromController {
let mut detect = true;
let eeprom_type = if let Some(path) = &path {
let metadata = fs::metadata(&path).unwrap();
let human_size = bytesize::ByteSize::b(metadata.len());
let eeprom_type = match metadata.len() {
512 => EepromType::Eeprom512,
8192 => EepromType::Eeprom8k,
_ => panic!("invalid file size ({}) for eeprom save", human_size),
};
detect = false;
info!("save file is size {}, assuming eeprom type is {:?}", human_size, eeprom_type);
eeprom_type
} else {
EepromType::Eeprom512
};
let mut result = EepromController::new_with_type(path, eeprom_type);
result.detect = detect;
result
}
pub fn new_with_type(path: Option<PathBuf>, eeprom_type: EepromType) -> EepromController {
let memory = BackupFile::new(eeprom_type.size(), path);
EepromController {
chip: RefCell::new(EepromChip::new(eeprom_type, memory)),
detect: false,
}
}
pub fn write_half(&mut self, address: u32, value: u16) {
assert!(!self.detect);
self.chip.borrow_mut().clock_data_in(address, value as u8);
}
pub fn read_half(&self, address: u32) -> u16 {
assert!(!self.detect);
let mut chip = self.chip.borrow_mut();
chip.clock_data_out(address) as u16
}
pub fn on_dma3_transfer(&mut self, src: u32, dst: u32, count: usize) {
use EepromType::*;
if self.detect {
match (src, dst) {
// DMA to EEPROM
(_, 0x0d000000..0x0dffffff) => {
debug!("caught eeprom dma transfer src={:#x} dst={:#x} count={}", src, dst, count);
let eeprom_type = match count {
// Read(11) + 6bit address + stop bit
9 => Eeprom512,
// Read(11) + 14bit address + stop bit
17 => Eeprom8k,
// Write(11) + 6bit address + 64bit value + stop bit
73 => Eeprom512,
// Write(11) + 14bit address + 64bit value + stop bit
81 => Eeprom8k,
_ => panic!("unexpected bit count ({}) when detecting eeprom size", count)
};
info!("detected eeprom type: {:?}", eeprom_type);
self.chip.borrow_mut().set_type(eeprom_type);
self.detect = false;
}
// EEPROM to DMA
(0x0d000000..0x0dffffff, _) => {
panic!("reading from eeprom when real size is not detected yet is not supported by this emulator")
}
_ => {/* Not a eeprom dma, doing nothing */}
}
} else {
// this might be a eeprom request, so we need to reset the eeprom state machine if its dirty (due to bad behaving games, or tests roms)
let mut chip = self.chip.borrow_mut();
if !chip.is_transmitting() {
chip.reset();
}
}
}
}
#[cfg(test)]
mod tests {
use super::super::super::EEPROM_BASE_ADDR;
use super::*;
use bit::BitIndex;
impl EepromController {
fn consume_dummy_cycles(&self) {
// ignore the dummy bits
self.read_half(EEPROM_BASE_ADDR);
self.read_half(EEPROM_BASE_ADDR);
self.read_half(EEPROM_BASE_ADDR);
self.read_half(EEPROM_BASE_ADDR);
}
fn rx_data(&self) -> [u8; 8] {
let mut bytes = [0; 8];
for byte_index in 0..8 {
let mut byte = 0u8;
for _ in 0..8 {
let bit = self.read_half(EEPROM_BASE_ADDR) as u8;
byte = (byte.wrapping_shl(1)) | bit;
}
bytes[byte_index] = byte;
}
bytes
}
}
fn make_spi_read_request(address: usize) -> Vec<u16> {
let address = (address & 0x3f) as u16;
let mut bit_stream = vec![0; 2 + 6 + 1];
// 2 bits "11" (Read Request)
bit_stream[0] = 1;
bit_stream[1] = 1;
// 6 bits eeprom address
bit_stream[2] = if address.bit(5) { 1 } else { 0 };
bit_stream[3] = if address.bit(4) { 1 } else { 0 };
bit_stream[4] = if address.bit(3) { 1 } else { 0 };
bit_stream[5] = if address.bit(2) { 1 } else { 0 };
bit_stream[6] = if address.bit(1) { 1 } else { 0 };
bit_stream[7] = if address.bit(0) { 1 } else { 0 };
// 1 stop bit
bit_stream[8] = 0;
bit_stream
}
fn make_spi_write_request(address: usize, value: [u8; 8]) -> Vec<u16> {
let address = (address & 0x3f) as u16;
let mut bit_stream = vec![0; 2 + 6 + 64 + 1];
// 2 bits "10" (Write Request)
bit_stream[0] = 1;
bit_stream[1] = 0;
// 6 bits eeprom address
bit_stream[2] = if address.bit(5) { 1 } else { 0 };
bit_stream[3] = if address.bit(4) { 1 } else { 0 };
bit_stream[4] = if address.bit(3) { 1 } else { 0 };
bit_stream[5] = if address.bit(2) { 1 } else { 0 };
bit_stream[6] = if address.bit(1) { 1 } else { 0 };
bit_stream[7] = if address.bit(0) { 1 } else { 0 };
// encode the 64bit value
for i in 0..8 {
let mut byte = value[i];
for j in 0..8 {
let bit = byte >> 7;
byte = byte << 1;
bit_stream[8 + i * 8 + j] = bit as u16;
}
}
// 1 stop bit
bit_stream[2 + 6 + 64] = 0;
bit_stream
}
#[test]
fn test_spi_read_write() {
let mut spi = EepromController::new_with_type(None, EepromType::Eeprom512);
// hacky way to initialize the backup file with contents.
// TODO - implement EepromController initialization with data buffer and not files
{
let mut chip = spi.chip.borrow_mut();
let bytes = chip.memory.bytes_mut();
bytes[16] = 'T' as u8;
bytes[17] = 'E' as u8;
bytes[18] = 'S' as u8;
bytes[19] = 'T' as u8;
bytes[20] = '!' as u8;
drop(bytes);
chip.memory.flush();
}
let expected = "Work.".as_bytes();
// First, lets test a read request
let stream = make_spi_read_request(2);
for half in stream.into_iter() {
spi.write_half(EEPROM_BASE_ADDR, half);
}
spi.consume_dummy_cycles();
let data = spi.rx_data();
assert_eq!("TEST!".as_bytes(), &data[0..5]);
{
let chip = spi.chip.borrow();
assert_eq!(SpiState::RxInstruction, chip.state);
assert_eq!(0, chip.rx_count);
assert_eq!(0, chip.rx_count);
}
// Now, modify the eeprom data with a write request
let mut bytes: [u8; 8] = [0; 8];
bytes[0] = expected[0];
bytes[1] = expected[1];
bytes[2] = expected[2];
bytes[3] = expected[3];
bytes[4] = expected[4];
let stream = make_spi_write_request(2, bytes);
for half in stream.into_iter() {
spi.write_half(EEPROM_BASE_ADDR, half);
}
{
let chip = spi.chip.borrow();
assert_eq!(expected, &chip.memory.bytes()[0x10..0x15]);
assert_eq!(SpiState::RxInstruction, chip.state);
assert_eq!(0, chip.rx_count);
assert_eq!(0, chip.tx_count);
}
// Also lets again read the result
let stream = make_spi_read_request(2);
for half in stream.into_iter() {
spi.write_half(EEPROM_BASE_ADDR, half);
}
spi.consume_dummy_cycles();
let data = spi.rx_data();
assert_eq!(expected, &data[0..5]);
{
let chip = spi.chip.borrow();
assert_eq!(SpiState::RxInstruction, chip.state);
assert_eq!(0, chip.rx_count);
assert_eq!(0, chip.tx_count);
}
}
}