This module is written purely and always breaks when changes are being
made into the 'core' module, so as long as I don't use it, I don't feel
like maintaining it.
Former-commit-id: f5b18ba54a27d22e8a195dd0912ec9c8f29fa830
1) Decouple SysBus from Gpu
2) Split Gpu rendering function into separate modules
3) Cleanup
Former-commit-id: 0435ad1c9c1de72ed50769fabfea7c5f33b670e0
This was apparent in Dragon Ball Z - Legacy of Goku II, where the save
point sprites were not rendered at all.
Former-commit-id: 156356ebe2f2a4879602019a1fe2c18fe2b8a395
The symptom of the problem was in the form of a rythmic click sound popping in the left channel.
Diving deep into Kirby's binary, I found out that channel B and channel
A are playing too different pcm buffers simultationsly: A is enabled for
the right channel and B is enabled for the left.
I found out that the game's sound driver was using VCOUNT in order to syncornize the audio,
but in some occassions the fifo DMA was not disabled in time, causing the DMA to
fill the fifo in additional 16 bytes of garbage residing next to channel
B's pcmBuffer.
After a thorough check-up of the GPU state machine, I find out that I
stay in VBLANK for 1 line too long, and that's what caused the audio
buffer to de-sync with the gpu emulation.
This commit fixes this issue.
Former-commit-id: e0f20bd01b8abf62da486e2501cff197a9a22763
Cleanup timer.rs
run cargo fmt
restore debugging continue&frame commands
Fix bug introduced in previous commit causing the bios animation to
hang
Former-commit-id: 188acaa1121503a97f2d3be816f6f57835e17fe1
This commit removed the dummy iomem buffer, and the bios busy waits on
REG_SOUNDBIAS in order to proceed.
Former-commit-id: 1fb8e2b621bed22da55781adcaae748aaaf845b9
This solve many graphical glitches with normal sprites in:
- Kirby - Nightmare in Dreamland
- DragonBall Advanced Adventure
- DragonBall Supersonic Warriors
Former-commit-id: aa7813720ca86c0ff0a3111f245d35765112d750
- Bad LSR emulation caused an edge-case making allmost all of the game I tested fail to boot past intro.
- Incorrect sign extension of offset5 in THUMB caused bad address calculation.
Kirby boots with rendering glitches, I played past the first 2 boses
without crashes.
Former-commit-id: 8ea0ad6eb0f70e6dc23d1f2fcc44c8c0b3448fba
According to GBATEK:
The SAD, DAD, and CNT_L registers are holding the initial start
addresses, and initial length. The hardware does NOT change the content
of these registers during or after the transfer.
The actual transfer takes place by using internal pointer/counter
registers. The initial values are copied into internal regs under the
following circumstances:
Upon DMA Enable (Bit 15) changing from 0 to 1: Reloads SAD, DAD, CNT_L.
Upon Repeat: Reloads CNT_L, and optionally DAD (Increment+Reload).
Former-commit-id: 1e606dc88603a4600a79a341ef17fe8ccb482871
